lindnjoe

cover

santa door corner.jpg

Santa Door Corner v1.png

plate_1.png

santa door corner.webp

Santa Door Corner v1.webp

plate_1.webp

0.2mm layer, 3 walls, 15% infill

plate_2.png

santa door corner with sleigh.webp

plate_2.webp

2 Plates: Right and Left Version. I added Santa's sleigh behind Santa to offset the weight of his bag of presents. Should help it to sit on its own.

0.2mm layer, 2 walls, 15% infill

This is a 1 mm thicker version to hopefully help it sit better on its own, it is bottom heavy and a piece of double sided tape will easily help secure it.

3 mm thick 0.2mm layer, 3 walls, 15% infill

ChicoQuente

IMG_6972.jpeg

I shrunk this down to the largest size I could seem to get on the A1 mini. 76% of original size, rotated to maximize space. Both left and right direction are included.

A1 Mini - 76% - 0.2mm layer, 2 walls, 15% infill

PRINTCELL

WhatsApp Bild 2025-11-23 um 20.30.10_f9becdb5.jpg

santa.png

i wanted it faster with a minimum of waste,so i thined out the model and added a second layer without filament changes.i made it for the right side corner.prints faceside down.&nbsp;2mm thick as original17 filament changes only

superfast, 0.2mm layer, 2 walls, low waste

UpdatedNow includes left and right hand versions with Santa's sleigh behind him to help balance the weight. It should now stand up on its own.A 4 Color Santa Door CornerI left the old version up as well

Santa Door Corner

ASIA

Print Profile(5)

Description

Comment & Rating (109)

License

Related Models