FPV Drone Wall Hanger/Mount
Print Profile(2)
Bill of Materials
- M4_CounterSunk_Wallscrew x 2:
Description
This is the wall version of my popular FPV drone stand.
This allows you to display your FPV drone in a way that looks like it's in-flight even when it's having a rest.
The Design
This prints in two parts, the head and the arm.
There are 3 different arms depending on whether you want the drone angled to the left, angled to the right, or facing straight away from the wall.
Print the head and your chosen arm.
Fitting
With both your parts fitted, add the two M3x5x4 threaded inserts (as listed in the Bill of Materials below) into the end of the arm, then slot the head onto it. Finally screw the head onto the arm with two M3x25 screws (also listed in the BOM).
Once it's all fitted together, attach to the wall using 2x M4 wall screws.
Printing
I'd advise using the profiles supplied but if you want to slice yourself, print the arm on it's long flat side (if it's a left or right, orient with the angle sticking straight up), and print the head in the orientation it'll be used, on it's flat base.
Support isn't essential but I recommend it for the first little bit of angle on the Left and Right versions of the arm, but that's pre-applied on my profiles.
PLA will be fine but this will work with most material choices.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (54)