Ýo-han

cover

IMG_20240827_090144.jpg

IMG_20240827_090202.jpg

plate_1.png

2024-08-27_a8c77a966b2c8.jpg

The yellow black wheel was made simply with the AMS.&nbsp;&nbsp;The glow in the dark was a little harder since the AMS didn't take it. For those wanting to do the same, here is what I did:I first removed the body and sliced only the logo. Printed it in black pla. Leave the logo on the plate, only remove the filament on the front of the plate.I then removed the logo and sliced only the body (be carefull not to move it around on the plate). When printing I turned off bed leveling and printed the glow in the dark with the external spool.&nbsp;PS. the logo in the yellow one in the photo was not perfectly centered, this version does have it centered.&nbsp;Questions, feel free to ask!

0.16mm layer, 3 walls, 10% infill

When my wife was complaining about toxic fumes I thought about a glow in the dark nuclear extruder wheel. I couldn&#39;t find one, so I made it. Maybe someone else likes this as well, so I thought I share it.

Print Profile(1)

Description

Comment & Rating (24)

License

Related Models

Nuclear Extruder Wheel Bambu A1

Print Profile(1)

Description

Comment & Rating (24)

License

Related Models