2nd Gen Toyota Tacoma Grill Emblem

Updated 5/12/2026

Added some additional designs. There are a total of 32 grill emblem designs that I've created. Created a plate for each emblem. Simply print the one you like. Most range as little as an hour and ½ to 2hours the most. This is the 1st set of 32 Grill emblems. I plan on creating a 2nd set of grill emblems when I get a chance. Once again these grill emblems are strictly for a 2nd gen Tacoma (2005-2011). May fit the 2.5 Gen Tacoma as well (2012-2015) but I cannot verify.

-------------------------------------------------------------------------------------------

Liked the grill design for the Toyota Tacoma Grill Emblem created by PLaperriere on Thingiverse but wanted something different. Took this design and also took PLaperriere's design and created my own.

This is for a 2nd generation Toyota Tacoma (2005-2011) . I printed mine in PETG and it was very easy to print. Took a little over an hour to print on the A1 Mini and took only 2 colors (I printed mine in black & red). Also printed mine with a .4mm Nozzle. I've had it on my Tacoma for over a year and it still looks new. I would recommend at least printing it in PETG since PLA will most likely warp and fade with the elements (heat & sun).

There are 2 slots in the back of the emblem to pass through cable zip ties to secure it to the grill. You'll need to remove on the Toyota emblem to install this (there's 2 little black plastic pins on the top and bottom of it. Push those in). The entire process takes less than 5 minutes and changes the way the front grill looks.

May fit the 2.5 Gen Tacoma as well (2012-2015) but I cannot verify.

Brim and supports are not necessary.