Grab-N-Go - portable pet bowls (modular container)

a portable Grab-N-Go / To-Go container/canteen to take when going on hikes or to grandmas.

Some info:

my goal for this design was to make something that requires no additional hardware, easy to print, portable and tough enough to take with me when going hiking or going out for the day. it can be used for food, treats, first aid, emergency pack, etc. 

• the print comprises of: 
  • 2 bowls for water and food (100mm x 45mm) 
  • a larger container for food and treats (100mm x 105mm)
  • the top/lid is designed with a poop-bag holder. (46mm x 45mm)
  • Total dimensions: Approx. 100mm (3.9 inch) Width x 196mm (7.7 inch) tall -assembled.

  • all compartments are interchangeable and more sections can be added or removed to your liking.

     

    ill add more sections & different sizes as additional profiles. please let me know if you want a specific size or design.

Use Bambu Studio to add/emboss text for Names.

• Please refer to this page to get more information on adding texts
• https://wiki.bambulab.com/en/software/bambu-studio/3d-text

important note:

• My profiles are set to NOT slowdown for overhangs and to have a constant fan speed. this will give an overall better finish and cut down on printing times. please be aware of this if not using my profiles and/or when changing filament type in the slicer.

  

• 99% of the print requires NO SUPPORT (except the handle connector).

  

• The Handle is press fit from both sides. (Use both hands from each side and squeeze to snap into socket) 

  

  ***Once inserted it can be hard to remove but can be removed with a little elbow grease if you need to reprint***

  -ADD a brim if you have trouble printing the handle.