Meggotina

cover

photo_2024-08-25_17-46-34.jpg

plate_1.png

2024-08-25_c08447c2d776a.jpg

0.2mm layer, 2 walls, 15% infill

2024-08-25_239b6c34c566

0.2mm layer, 4 walls, 30% infill

photo_2024-08-30_15-03-33 (2).jpg

photo_2024-08-30_15-03-33.jpg

This is a very strong profile made with ABS.I was a bit scared that PLA might snap in some day, so I printed it with ABS and at 45 degree angle. It is not as pretty and needed some polishing but overall I'm happy with this one. At least it will last longer and I sleep peacefully&nbsp;

ABS, 45 degrees

d’mitri

IMG_1488.jpg

IMG_1489.jpg

IMG_1490-EDIT.jpg

Original model could be fit on a1 mini if rotated and placed on its side, but I wanted to have maximum strength of the hooks that hold the helmet, so they need to be printed horizontally… and so I decided to split the model in 2 halves, added holes for pins to connect, pins included*. 4.8mm worked for me perfectly, but added 4.7mm just in case. They can be easily scaled if needed of course.Supports enabled, of course, and increased their brim size just to be sure. &nbsp;Printed with bambu PLA basic black.The result feels very strong, no bending.&nbsp;*no pins in preview, but they are included in uploaded profile

split in half to fit in A1 mini, pins included

wesyarber

PSVR2 Wall Mount - V2

The model is great, but I didn&#39;t actually need the controller mount support. Compared to the original by <a target="_blank" href="https://www.printables.com/@c0d3c_435615" rel="nofollow noopener">c0d3c</a>, version by <a target="_blank" href="https://www.printables.com/@WesYarber" rel="nofollow noopener">WesYarber</a> has the nice logo and the cable management option. &nbsp;15% infill looks sufficient for my taste, because it only holds the headset, but I will add a stronger print profile also!&nbsp;&nbsp;

PSVR2 Headset Wall Mount

ASIA

Print Profile(4)

Description

Comment & Rating (15)

This remix is based on

License

Related Models