Fire Emblem - Golden Deer Banner

Golden Deer banner from Fire Emblem Three Houses. Instructions below:

Project: Golden Deer.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 159.42x250mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.3mm and the Actual Depth is 2.3mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA Overture Royal Copper Transmission Distance: 2.4

PLA Overture Yellow Transmission Distance: 15

PLA Elegoo Beige Transmission Distance: 3.1

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #5 (0.48mm) swap to Royal Copper

At layer #10 (0.88mm) swap to Yellow

At layer #16 (1.36mm) swap to Beige

At layer #19 (1.6mm) swap to Yellow for the rest.

I hope you enjoy!