Fire Emblem - Black Eagles House Banner

Hueforge banner of the Black Eagles house from Fire Emblem Three Houses. Instructions below:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 159.42x250mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA Elegoo Black Transmission Distance: 0.4

PLA BambuLab Basic Red Transmission Distance: 4

PLA Overture Yellow Transmission Distance: 15

PLA Elegoo Beige Transmission Distance: 3.1

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Red

At layer #9 (0.8mm) swap to Black

At layer #14 (1.2mm) swap to Red

At layer #19 (1.6mm) swap to Yellow

At layer #25 (2.08mm) swap to Beige for the rest.

I hope you enjoy!