Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
13.5 h
3 plates
Open in Bambu Studio
Boost
554
1445
136
72
1.7 k
874
Released
Description
This is a Bambu print profile for the original file found on the Thingi site #4758307
This profile is for Bambu Glow in the dark filament, and can be easily swapped for standard PLA. Picture is the Green glow and it's by far the best glow filament I've tried from any brand.
This profile is at 800% scale, which results in a skeleton about 13 inches tall standing and 10 inches sitting.
No additional hardware needed. The legs are sized to 805% scale because it's quite a tight fit, you could possibly go up as high as 810% (or do a quick sanding job on the connected parts.) The arms do not need this same treatment.
Check out my other Halloween stuff here: https://makerworld.com/en/collections/2647222
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (136)