Suction Cup Hook
Print Profile(1)
Description
Suction cups are cheap and can be bought by the dozen. I have quite a few but none had the ideal hook for my shower.
In the print profile you will find 4 plates. Pick the model that you need, depending on how confident you are that your printer can print well overhangs with no support required. The profiles that have thin radii require a slower print speed.
Print profile is saved from a P1P with 0.4mm nozzle using PETG Translucent. Adjust according to your set up.
I am using it for a light loofah, so I chose 15% infill. If you want to hang heavier items, increase the infill percentage.
Each plate contains a slightly different hook. The easiest to print are the ones from plates 3 and 4. The slickest is located on plate 1.
I was able to print all of them with no support. If you want to add a bit of support under the bottom radius, you can do that.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)