Wall mount for electric guitar

I had this model in gcode and I took it time ago from thingiverse if I am not wrong. If the author of this sees it, please let me know and I will mention them in the description. 

Unfortunately, one of the hangers broke and I couln´t find the project again, but the gcode was in one of my SD cards. 

I converted the gcode into stl again using https://gcode2l.com/

I am uploading this because it was very useful and very versatile when you hang your electric guitar.

Note 1: I used 50% infill and it may require some deburring tool or light sanding.

Note 2: If you print two (to hold the guitar from both strap buttons), you should print 2x of the support; 1x of the hanger, and 1x hanger using the mirror (reflexion or symmetry) tool.