Wall Mounted LED Remote Holder
Print Profile(1)
Bill of Materials
- #6 wood screw x 1:
Description
After months of losing the remote for my office LED strips I designed this wall mount to store the button remotes that come with LED strips. This can be mounted anywhere using either a single #6 (3mm shank) screw or a 3M command strip. The case is chamfered to assist with sliding the remote into the mount in the dark and the design was created to not need supports when printed vertically (honestly it would probably print fine horizontally on most printers as well, it's only a 40mm bridge when laying flat).
I am using a slight brim when printing vertically on my A1 mini to assist with bed adhesion. Print time is roughly 1h07m at 0.28mm extra draft layer height using eSUN basic PLA.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)