Semi-circular Remote and Coaster Holder - Free 3D Print Model

Search models, users, collections, and posts

Ken Mills

Household>Decor

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Remote Holder Coasters - 0.2mm layer, 3 walls, 10% infill

Designer

43 min

1 plate

4.9(17)

Remote Holder - 0.2mm layer, 2 walls, 10% infill

Designer

2.5 h

1 plate

4.6(40)

Open in Bambu Studio

Boost

106

222

381

269

Released

Description

This remote holder is reminiscent of an amphitheater or stage. Four remotes can be stored around a stack of handy coasters. The shell design keeps the holder light-weight and saves material and printing time.

The coaster profile is set for zero top and bottom layers to expose the 10% honeycomb infill. Feel free to experiment with the infill pattern and density, and top / bottom layers for achieve different effects. You can also use other circular coaster models, just be sure to scale them to 99mm or less to fit the holder.

Comment & Rating (75)

@Erfinder_Jannis

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

The walls separating the remotes could be slightly larger and thicker However, everything else fits perfectly I even replicated this design with a different one, and it worked well

The profile uploader has replied

Show original

@KenMills

Thanks! Great idea to combine the two. This does work much better with smaller remotes. When I first created it one of the goals was to trying printing it large in a reasonable amount of time on a slow printer. I think modifying it to be solid with infill and adding a higher back would help.

@rodunk2

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

absolutely love this. quick, easy print with given settings.

The profile uploader has replied

@KenMills

Thanks!

@Szaman

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

Cool design. Could be more sturdy.

@rodunk2

Love it; came out great!

The designer has replied

@KenMills

Looks great and fits in quite well with the Penguins coasters ;) Thanks for sharing!

@tinytim443

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

Came out great and works really well.

(Edited)

The profile uploader has replied

@KenMills

Thank you for the great rating. I'm glad you like it!

@Bep89

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

Doesn't hold the remotes properly.

The profile uploader has replied

@KenMills

Sorry it didn't work for you. Smaller and thinner remotes likely work best, but there are so many variations.

@PairTech

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

a little thin but very functional!

The profile uploader has replied

@KenMills

Thank you! I have been trying to get back to this design to thicken it up a bit. The original was designed with my old and slow printer and I was thinking reducing the material usage would make it easier and faster to print. Hopefully I can spin off an improved version.

@mattpenn673

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

Really happy with the results, nice and easy print. Well done :)

The profile uploader has replied

@KenMills

Thank you!

@jsoko

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

looks great. only wish I was able to give it infill for more structure.

@Silverhuskie

Print Profile

Remote Holder - 0.2mm layer, 2 walls, 10% infill

Strength Issue:Walls should be a bit thicker. Other then that; nice.

The profile uploader has replied

@KenMills

Thanks for the feedback! I was trying to balance strength and filament usage ;) I will see about thickening the walls to strengthen it (which also make it heavier which is a good thing).

@Silverhuskie

Replying to @KenMills :

Idropped it once and the back wall broke xD Might as well be a bit under extrusion. Anyhow; perfect fit for my needs! Maybe 3 instead of 2 walls will do the trick!

(Edited)

@KenMills

Replying to @Silverhuskie :

Thinking about it more, the filament used could also be a problem. I have some filaments that would cause this print to be fairly brittle, especially at corners. I assume they just have lower layer adhesions and I just relegate them to test chunky or prints. My 6 year old still has one of this kicking around among her toys ;)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.