Lorcana Lore Tracker / Counter - Double Sided 1-20
Print Profile(3)
Description
If you like this model and it's not too much trouble, please hit the š button - it helps out a lot š
This is a double sided Lore tracker / counter for Lorcana. It is 3 separate parts: a top, a bottom and a dial in the middle. For the counter itself:
- 32mm diameter
- The front side dial goes from 1 to 10
- The back side dial goes from 11 to 20
Boost Me (for free)
Show your support by boosting this model. Any support is highly appreciated!
Assembly
The counter should snap together while allowing the dial to spin. It does take a bit of force to fully snap the pieces together. Apply pressure in the middle of the top and bottom when snapping together. Once snapped together, there shouldn't be any gaps between any of the pieces.
The dial is a bit tight so the number stays in place in case of an accidental bump or drop. For even more security, try adding a small drop* of super glue when snapping all the parts together. Be sure to line up both number openings on the front piece and the back piece before the glue fully cures.
* If you use too much glue, the glue will seep out onto the dial and become glued in place and not be able to spin. Ask me how I know thatā¦ š
A special thanks to user @EraMortrois for the inspiration!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)