NasHole (A Small Form Factor SFF NAS / PC case)

The NAShole case is a 6-bay ITX case designed for printing on the Bambu A1 printer or similar-sized printers. It also accommodates a single-slot PCIe card, such as a SATA to UEFI adapter or a NAS card.

Features:
The Nashole case is fully 3d printable, only requiring seven separate parts.

Capacity for up to six 3.5" hard drives and one 2.5" solid state drive.

Requirements for assembly:

1x Mini ITX motherboard (Plus Processor and Ram of your choice)

1x SFX PSU (Power supply)

6x: 3.5" HDDs.

1x: 2.5" SDD or nvme if your motherboard supports it.

1 or 2: 120mm fan (You don't have to use a noctua, but it is nice.)

1x: 6 in 1 sata power

6x: sata cables

M3x8mm 10.9 Carbon Steel Countersunk Head Hex Socket Screws

--------------------------------------------------------------------------------------------------------------------------------
(These three use the same set of parts. Just buy one.)

4x: m3 6+4 motherboard standoffs

4 – 8x: m5*10 fan screws

4x: m3 5*5 case screws for power supply.

--------------------------------------------------------------------------------------------------------------------------------

[Optional] Only get this if your motherboard does not have seven sata ports.

1x: Six port PCIE sata card.