Lilygo T-Display S3 Case and Stand
Print Profile(1)
Description
A simple display stand for a Lilygo T-Display S3. The case has 2 buttons which press against the buttons on the circuit board, and has a cutout for the USB power cable. There are 2 versions of the case, one with and one without a cutout for a LDR (connect to the T-Display ADC pins and then you can automatically control the brightness of the display). The default plate in the 3MF file does not have the LDR hole.
To assemble, insert 4x2mm brass inserts into the case body (alternatively widen the holes in the back to 3.5 mm and use 3mm self tapping screws). Place the circuit board in the case and screw the back on. There are 2 pins on the back that push on the board to ensure it's not loose.
To fix the base, you will need to insert an M3 bolt.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)