SVG Crocs charms / earper jibbitz

Use SVG to create custom Crocs Charms / Jibbitz! Earper inspired charms are included.

👉 Please rate the print profiles and follow me if you like - It would help tremendously. 👈

Use OpenSCAD or the online customizer feature above (the green “customize” button which can be seen in the web above).

Just print the charms with a filament color change, clip them onto your crocs (they stay without glue) and have fun!

Thanks

Big thanks to @Earper4Life for his idea for earper inspired custom crocs charms - it was the base for this configurable model. And thanks for all the print testing and great pictures!
 

Thanks go out to nyknyc and his spike-crocs-charm where i got the idea of a two-part design from. Check out his model as well!

Features

• Uses minimal filament, print many in one go, prints in place
• No glue needed, just push the pin in from the bottom
• Color change possible also without MMU

Customizing

You can customize the model. To do that, please install OpenSCAD on your own computer and follow these in depth instructions.

Printing & assembly

• Use .2mm quality setting
• no support material needed
• change filament color at 5.8mm

Assembly

Print pin and charm (text charms are available here)

On the back side of the text, you have a hole where you need to press in the pin

In case its hard to press in on the Croc, press it in before mounting to the Croc once:

Then put the pin in from the bottom

And put the word on top:

More charms

Check out the emoji crocs charms

And the configurable text charms