Universal Carabiner - Free 3D Print Model

Search models, users, collections, and posts

Stag 3D

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 30% infill

Designer

4.9 h

2 plates

4.7(989)

☆PETG Quality☆ 0.2mm layer, 2 walls, 30% infill

20 min

1 plate

4.8(648)

0.2mm nozzle, 0.1mm layer, 4 walls, 30% infill

1.2 h

1 plate

4.3(19)

PETG - Fine 0.12mm - Print by Object - Single and Full Plate

2.5 h

2 plates

4.8(5)

Click to see more

Open in Bambu Studio

Boost

7547

19235

1841

556

25.3 k

18.9 k

Released

Description

Boost Me (for free)

Membership

Want to sell Stag3D prints? Click here to become an official reseller.

Join

Want to sell Stag3D prints?

Simply head over to patreon.com/Stag3D or follow the link in my bio.

Universal Carabiner clip / hook

Got something… you need to clip to… something… let this carabiner give you a hand.

A simple but strong contemporary one piece design requiring no supports and will print in no time. Here's just some of the things you could use it for…

Drinks bottle to your school/gym bag
Car keys
Helmet to your bag
Sea shoes or dry bag to your paddle board (I use them for this!)

Strength: Tensile tested up to 50lbs / 22Kgs with PLA!

Filament: It'll print fine and work with PLA, but for longevity and strength, especially if being used outdoors I would recommend PETG or a higher equivalent.

Comment & Rating (1841)

@AgentG

Print Profile

0.2mm layer, 2 walls, 30% infill

Absolute life saver. I couldn’t find a way to clip my hard hat to my backpack before a flight and saw this. 20 minutes later, I snapped this on and got in my taxi to the airport. A perfect example of how 3d printing quickly solves problems. I appreciate the quick, high quality print!

@user_1581699580

Print Profile

0.2mm layer, 2 walls, 30% infill

I think the design is well thought out, but out of basic PLA which I heard this would work well with, I did not find it very easy to use, I am personally able to bend it but if I were to hand it to someone else, there's a good chance they wouldn't be able to open it enough to fit anything onto it

@user_3028242135

I found the model very good and it is really quite resistant However, I had problems with the cutouts joining during printing, I tried to detach them but it didn't work. So I made a change to the original model. I increased the thickness of the cutout, where it was about 0.15mm, I left it at around 0.3mm. And it came out perfect on my printer. I also added a ring at the end, as it was necessary for my use If you allow it, I can publish the file with the larger cutout, as I saw some other reports that this also happened

Show original

@user_3981728775

Hello can you send the file with the cutout please

Show original

@Ideate.3D

Print Profile

0.2mm layer, 2 walls, 30% infill

This printed great! Nice and fast. Good strength.

@GTFCo.Founder

What is the thing the carbineer is clipped to? It looks interesting.

@Ideate.3D

Replying to @GTFCo.Founder :

it's a slide lock container that I found on here about a year ago. I printed a few and use them often. If I find it again, I'll come back and tag them for you.

(Edited)

@dollars

What's that filament? It looks great!

(Edited)

@SethPhelps

Print Profile

0.2mm layer, 2 walls, 30% infill

Best carabiner I've used yet that I printed.

The profile uploader has replied

@Stag3D

Thanks 👍🏼

(Edited)

@Ariox3D

Print Profile

0.2mm layer, 2 walls, 30% infill

Perfecto... ¡¡¡¡

@user_2407707011

Which filament do you use

(Edited)

Show original

@M_King85

Print Profile

☆PETG Quality☆ 0.2mm layer, 2 walls, 30% infill

Good print thx for the model printed in PETG

@ForgeLabs3D

Printed a plate full of them since i needed them as an emergency for this evening Not a single one opens, just wasted a bunch of filament and now i don't have any in time for the evening Thanks.

@user_4242636887

Looks like user error

@soundlessflight

@kebrinho

Print Profile

0.2mm layer, 2 walls, 30% infill

nice 👍🏼 but do you open it inwards or sideways? 😀

The profile uploader has replied

@Stag3D

Thanks. It opens inwards

@Fascination3D

Print Profile

0.2mm layer, 2 walls, 30% infill

very nice and useful print !

The profile uploader has replied

@Stag3D

Thanks 👍🏼

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.