Neuschwanstein Castle Painted

This is a fully painted model of the neuschwanstein castle that is featured in the BL online ads (the one with the little boy pulling a castle out of an X1C). According to BL, there was a problem with image licensing and they will not make the print file for that exact print available. This model has been painted for AMS use. As scaled, it's a massive print…5 days or so. So you may want to scale it down. If you don't have a dual AMS setup you can combine the blue shades to the same color, the white shades + beige into one color, and that will give you a 4-color setup while retaining the over aesthetic of this castle.

Printing: honestly I have not printed this with AMS. My main goal here was to just get it painted. I would recommend printing a test model with no color, which should just take a few hours if scaled down. That will allow you to see how the print goes and make adjustments. The settings in the provided profile are just my best guess as to what would work. There aren't that many steep overhangs and you might get away with printing without or with minimal supports. In fact, the original model has several print photos that were successful.

Good Luck.