PTFE Protector and Increased Air Flow

PTFE Protector and Airflow Increaser for models tested in the P1 line.

This Glass Support serves as a protector for the PTFE tube that scrapes against the glass and other accessories available for download.

It was also developed to improve the flow of in prints that require less heat (in the case of bridges, for example).

It can be used alone or with an upgrade that I developed myself, which deals with a more effective system of lighting, airflow and support for the glass cover. (image below)

Here is the link to the second part if you are interested in complementing your support

https://makerworld.com/en/models/582394#profileId-503515

All models are developed to be as minimally aggressive as possible to the design of the original printed model, being as minimalist as possible.

The assembly steps are simple and you can print with the slicer configuration you want, as I tested it in several ways and as long as your printer is calibrated there will be no problems.

ATTENTION BEFORE ATTACHING, TRY TO MOUNT IT ON THE PRINTER TO AVOID ATTACHING IT WRONG.

These are the printed parts with their fasteners.

It should be assembled like this

Attention, be sure to check that everything is correctly fitted so that there are no unwanted surprises.

THIS WAS THE FINAL RESULT: MINIMALIST, FUNCTIONAL AND RESISTANT

I hope you like it and if you have any questions or suggestions I would love to hear from you all, I will respond as soon as possible.

TAKE ADVANTAGE OF AND DISCOVER THESE PROJECTS

Auxiliary Fan Anti-Dust Cover

https://makerworld.com/en/models/605281#profileId-528036

Ventilated Light Holder for Glass Cover

https://makerworld.com/en/models/582394#profileId-503515

GLASS LID SUPPORT V2 by REIS

https://makerworld.com/en/models/561728#profileId-481706

 

HEXAGONAL WRENCH HANDLE 

https://makerworld.com/en/models/571549#profileId-491581