Print Profile(1)
Description
Membership
Thanks for subscribing, I 100% appreciate you. This subscription will encourage me to design more models for your pleasure. If you have any issues with a model, please do not hesitate to contact me.
This is the original magnetic clock, I was only going to post this on Etsy, until I found out someone here stole the design, so thought I'd post the original.
This is a wall hanging clock. Most clock mechanisms found on Amazon will work as long as you select the mechanism with the 6mm length thread.
You'll need to order Qty 8 of 6mm Diameter by 2mm thick magnets. (which actually measure 4.8mm diameter x 1.6mm thick)
Print the face of the clock face down to make the surface as smooth as possible (a smooth plate will also help)
Print all of the parts and assemble. It's really a simple build
* Install the 8 magnets, ensuring the polarity is correct
* Install the clock mechanism
* Assemble the clock mechanism hands to the correct pinions on the mechanism
* Assemble the back plate to the front plate by simply aligning the pins to the holes
* Place the magnetic front hands to the magnets on the inner hands, if you're close enough, they will find their way.
Intellectual Property Warning
https://docs.google.com/document/d/1xvsnVsyrgOc4ePlwafu1LrdOusEiITvd_l6DpnUGvwY/edit?usp=sharing
Boost Me (for free)
If you have a spare boost, it'd be greatly appreciated.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)