Search models, users, collections, and posts

Flexy Banana

Remixed by
Richard Konsky
Toys & Games>Other Toys & Games
IP Report

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3.5 h
1 plate
4.6(73)
4PCS 0.2mm layer, 2 walls, 15% infill
4PCS 0.2mm layer, 2 walls, 15% infill
Designer
13.8 h
1 plate
4.7(3)
Open in Bambu Studio
Boost
424
798
100
46
1.4 k
806
Released 

Description

THIS IS NOT MY WORK I DID TAKE THE TIME TO UPLOAD IT TO MAKER WORLD TO SHARE AS ALLOWED BY CREATOR
MADE BY Keep Making @KeepMaking printables.com

A silly little print of a Flexible Banana. It's a great fidget toy.

No need for support while printing.

Prints in PLA with no problems, but I assume PETG should give the banana even more flex.

Be aware that you need to have a pretty well-tuned printer to pull this off.

Have fun with your super flexi banana!



flexi
banana
flex
flexy

Comment & Rating (100)

(0/1000)
@CorsairCrafts
Print Profile
0.2mm layer, 2 walls, 15% infill
You really need to have your adhesion settings keyed in for this one, especially if you’re using a different plate like I was lol. Totally worth it—and really, we all need that perfection skill anyway—and the final print is absolutely hilarious. now I have a “banana for reference” that everyone is going wild about. Spool for banana reference. Great print. Thanks!
1
Reply
@user_1025672785
Print Profile
0.2mm layer, 2 walls, 15% infill
easy print and satisfying👍
The profile uploader has replied
0
Reply
@richardkonsky
yes i agree thanks for the review!
0
Reply
@ThunderHawk
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed with ABS, came out perfect
0
Reply
@user_703084308
does it have to be printed with flexible filament or could it be printed with hard filament
The designer has replied
1
Reply
@user_703084308
never mind I figured it out
0
Reply
@richardkonsky
it can be printed with hard filament just don't stretch too much pla is know to be brittle if you have a stronger kind it should work better
0
Reply
@user_3957577073
Replying to @user_703084308 :
yes or no then?
0
Reply
@LETSGOCAVS
Print Profile
0.2mm layer, 2 walls, 15% infill
Very good print!
0
Reply
@user_3998510387
Print Profile
0.2mm layer, 2 walls, 15% infill
printed great in pla on my a1 mini 👍
(Edited)
0
Reply
@user_3304812370
Print Profile
0.2mm layer, 2 walls, 15% infill
Super satisfying print! I really liked the flexibility of it
0
Reply
@DT3213
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect
0
Reply
@bioniccid
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
...very nice!!! One more hole and it's a perfect pendant ;-)
Show original
0
Reply
@user_1111272758
can I use TPU on this?
The designer has replied
0
Reply
@richardkonsky
i am not sure? would you like me to try first? i am worried it will get stuck
0
Reply
@richardkonsky
tpu (black) as a test works and feels better then petg (yellow) however it requires manual prep
0
Reply
@richardkonsky
and it is even more flexible
0
Reply

This remix is based on

Flexy Banana
Flexy Banana

License

This user content is licensed under a
Creative Commons Attribution-Share Alike

Related Models

Banana Hanger
Banana Hanger
727RC
15.4 k
3.9 k
香蕉长刀-Banananana knife
Banana Longsword - Banananana Knife
Soap_Warrior
12.6 k
4.6 k
Nanakatana – The Banana Sword Katana Blade
Nanakatana – The Banana Sword Katana Blade
YY the panjang
13.4 k
3 k
Print in Place Articulated Flexy Chameleon
Print in Place Articulated Flexy Chameleon
KOGI3D
15.6 k
4.3 k