SCART-Lock for RetroTINK-4K

The SCART-Lock for RetroTINK-4K slips over the top of a standard SCART connector. The thumb screw flanges securely anchor the SCART cable to your TINK so you can enjoy worry-free crispy RGB video.

Purchase here: kytor.com/store/product/rt4k-scart-lock

SCART-Lock is intended only for use with standard SCART connectors as shown in the photos and should be considered incompatible with alternate SCART connectors.

Printing:

• Use Duramic 3D PLA or equivalent
• 0.4mm nozzle, 0.2mm height, 50%+ infill, 4+ walls
• For the artwork style, use the Bambu/Orca paint tool to fill color
• No brim or supports necessary

Assembly:

• Use a soldering iron or alternate to insert these Heat Nuts from the flange face side
• Use this technique to ensure the nuts are perfectly flush
• Thread in these Thumbscrews
• Slip SCART-Lock over the SCART connector and secure to the RT4K

Note: Amazon links are affiliates.