Elden Ring HueForge
Print Profile(1)
Description
The AMS profile has dimensions of: 142.8 x 200 x 1.6 mm / 5.6 x 7.8 x .06 in
A HueForge can take a bit to slice, but all the settings in the slicer are ready for a 0.4 nozzle. Below are the filament swap instructions. Keep in mind that if you use a different brand than I did, the color of the print might vary. No supports needed.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA PolyLite Pro Orange
PLA BambuLab Basic Gold
PLA BambuLab Basic Jade White
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #13 (1.12mm) swap to Gold
At layer #14 (1.2mm) swap to Orange
At layer #15 (1.28mm) swap to Jade White
At layer #19 (1.6mm) swap to Gold for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)