Thrustmaster T16000M Adapter for Virpil Desk Mount

Adapter plate for mounting a Thrustmaster T.16000M on a Virpil Desk mount with a V2/V3 Adapter.

Absolutely zero wobble, and allows almost 100 mm of horizontal distance adjustment.
A bit finicky to screw in the first time due to the locations of the joystick screws, but works great.

Required bolts:

• 2x M6x20 Countersunk head
• 4x M5x14 Hex head + 4x M5 hex nuts

Installation

1. Insert the four M5 bolts in the plate slotted holes.
2. Being careful not letting the M5 bolts fall, screw the joystick to the plate with the two M6 bolts
3. Mount the whole assembly on the Virpil V2/V3 adapter, inserting the four M5 bolts in the desk mount slots.
4. Adjust your preferred position of the joystick assembly on the desk mount
5. From bellow, move each pair of M5 bolts along the slots as close as possible to the joystick's M6 bolts (maintaining the desired joystick position) to make the structure as rigid as possible. Secure them with four M5 nuts.