Begode Master Front Bumper

This is a design I made for my Begode Master (v2, but should be the same for all versions). I am including the FreeCAD files so that you can modify it further if needed. I made three iteration of this project, you have access to all 3.

It can be screwed into the farings (if you have some) or velcroed to the battery packs.

I placed a bunch of holes thru the front so that you can attach whatever accessories you want (I often need an extra light, so that what you see on the picture).

This front bumper should be printed in TPU (I used BambuLab TPU 95A HF).

Does not need support as long as you place it on the plate up-side-down (see picture).

I recommend 5 walls, 5 top layers, 5 bottom layers, 10% gyroid infill