Cat in Shark Costume

A cute cat in a shark costume. I call them Sharkcats.

You can print this design in 5 colors with 1 AMS (There are print profiles provided with an automatic pause to swap one color. There is also an instruction sheet in the documentation.)

Attention: I recommend downloading this project and manage your flushing volume as you prefer if you print the multicolor version. White needs a lot of flushing to keep it clear on the print. You can place as many Sharkcats as possible on the buildplate and placing additional “Filament purge” objects on the plate if possible to minimize waste. I provided two print profiles with multiple Sharkcats on one plate (A1M buildplate size).

This model is: PRINT IN PLACE – NO SUPPORTS

Testprints:

A1 Mini with a 0.4mm nozzle printed at 100% size in single and multicolor.

Filament used for the multicolor testprints:

Polymaker PolyTerra PLA Sakura Pink

Bambu Lab PLA Matte Ivory White

Bambu Lab PLA Basic Blue Grey

AnkerMake Highspeed PLA Black

isanmate Highspeed PLA coffee

This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission. Contact me via E-Mail if you are interested in selling 3D-printed Neopyx3D designs.

If you like my work you can buy me a coffee and support my work:

https://buymeacoffee.com/neopyx3d

Recommended Main Settings:

Layer height: 0.16
Infill: 12 % Gyroid
Supports: No Supports needed
Build Plate Adhesion Type: No Brim (Brim if you have adhesion issues)
Printing Temperature and Cooling: depends on filament