Summary

I use a inline fabrication mount for my old(red base) and new Lee Pro 1000 presses. With the old style the mount came with a bracket to catch the finished rounds in a bin. With the new(silver base) pro 1000's they are lower and that same bracket doesn't work so I made this little mount to catch the rounds on the new style. It will mount under the screw on the left side of the press and use the same plastic wing nut that came from inline fabrication. I used Cf nylon. The one picture is with a large bin full of .38 special with no bending, its rock solid. Your results my very with PLA or other material.

Print Settings

Printer Brand:

Creality

                                            Printer:                      
Ender-3 S1

Rafts:

                                            Supports:                      
No

Resolution:

0.2

                                            Infill:                      
100%

Filament: Coex CF Nylon
Black

                    
                        Notes:                     
I printer this on edge with a brim so the layer lines are not running the same direction as the weight in the bin when full.