Knurled Stackable Pill Case by davedandeneau

davedandeneau

Tools>Organizers

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

Scaled to 110% 0.16mm layer, 2 walls, 15% infill

Designer

4.9 h

1 plate

5.0(16)

Scaled to 150%, 0.16mm layer, 2 walls, 15% infill

Designer

7.4 h

1 plate

4.8(4)

Boost

228

317

Released

Description

These stackable pill containers can be configured with as many pill containers as needed.

Print multiples of the middle section to add more containers to a stack. I like to use different colors for each pill type and/or day of the week.

These prints do not require any support and should be printed oriented as shown in the photo of it dissasembled. No other unique settings are required.

After printing you may need to “work” the threads a few times by screwing and unscrewing them until smooth. I like to rub a little wax on the threads to make them turn smoothly.

These can be scaled up to a certain degree to make bigger or more minor cases. At about 150% the threads start to get challenging overhangs.

pill

pillbox

storage

Comment & Rating (20)

@HiddenAcres

Print Profile

Scaled to 110% 0.16mm layer, 2 walls, 15% infill

Printed just a lid and a bottom to test my tolerances. Went right together! Will be printing more.

@mLupin

Print Profile

Scaled to 110% 0.16mm layer, 2 walls, 15% infill

Excellent project

(Edited)

@emrahsavas

Print Profile

Scaled to 110% 0.16mm layer, 2 walls, 15% infill

@Skorpeyon

Print Profile

Scaled to 110% 0.16mm layer, 2 walls, 15% infill

Printed great, threads are smooth, the knurling on the outside is great for unscrewing.

@GeekMechanical

Print Profile

Scaled to 110% 0.16mm layer, 2 walls, 15% infill

works amazing been using it for a week now and it's amazing. just need to print another at 2 times scale for more room. nice size for portable travel with pills.