Crossbow Magazine for Crossbow by OJum

I really like OJum´s Crossbow model

https://makerworld.com/en/models/561664#profileId-481131

so i got a little carried away with attachements for it.

This Magazine holds up to 12 Bolts with a 8mm diameter (the ones recomended in OJum´s Model), which makes shooting them even more easy and by the way… it really looks badass if you ask me.

i might have overengeneered it a little, but it grew like this in the process of designing and testing.

You might have to switch the two screws holding the clip with longer ones to be able to mount it, but it is worth it in my opinion.

I used these Holders for the Bolts https://makerworld.com/en/models/561664#profileId-481131 so if you use Bolts with a different Diameter you can exchange the necessary parts according to your needs.

Unfortunately the holes of the original Model were a little asymetrical, waht makes the assembly a little more tricky but you will figure it out, its not that hard. ;-)

Check out the Handle for it aswell.

https://makerworld.com/en/models/582374#profileId-503501