Search models, users, collections, and posts

Stitch and Ducklings Coaster

StudBuffin
Generative 3D Model>Image to Keychain
IP Report
This model is created by Image to Keychain
Make Your Model

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
1.5 h
1 plate
4.5(2)
Open in Bambu Studio
Boost
31
56
6
2
26
13
Released 

Description

Stitch and ducklings coaster

 

I have used elegoo rapid white and black, elegoo PLA plus blue and yellow. Printed on a P1S using a 0.4 nozzle (would be even better with a 0.2 nozzle).

 

More Stitch on profile!

 

Powered by MakerWorld-Image to Keychain (https://makerworld.com/makerlab/imageToKeychain)

 

 

Helpful Note:

Most of my prints are detailed and have fine lines -  you may wish to download and print with a 0.2 nozzle however all are tested with a 0.4 nozzle.  If you use certain filaments such as matte ones these are more prone to bleeding colour and you may wish to look at the purge settings.  Above all: It is essential that you have a clean bed and use a small bit of adhesive, my go to is 3DLAC.  This means that the finer details will stick to the bed without issue.

 

Boost Me (for free)

Boost me for free - this helps me to buy the filament to keep the designs coming! :) Thanks in advance!

stitch
stitch and ducklings
disney
lilo and stitch
cute
ohana
coaster

Comment & Rating (6)

(0/1000)
@ryguy013
Boosted
Overall it turned out great, this was printed as a gift for my sister in law who loves stitch. Bambu P1S using AMS. Filaments are overture PLA Pro White, Inland PLA Pro Yellow, Inland PLA+ Black, and Overture PLA Pro Digital Blue. I printed with a 0.4 nozzle, this works in a pinch or if you are in hurry. I would highly recommend printing with 0.2. You can see some of the black didn't fill in around stitches outline. From what I can tell this is a nozzle size/slice issue and wasn't caused by any extrusion issues, I made several of these and the missing black is identical on all 3.
The designer has replied
designer
1
Reply
@StudBuffin
need me a 0.2 nozzle!
0
Reply
@user_1493215223
Print Profile
0.2mm layer, 2 walls, 15% infill
Great Model, looks and prints Great with AMS, thanks for sharing.
The profile uploader has replied
0
Reply
@StudBuffin
thank you! I love the blue you chose!
0
Reply
@ryguy013
Boosted
Looks great! print with 0.2 nozzle
designer
1
Reply
@user_4250626104
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Mama Duck & Her Duckling Parade
Mama Duck & Her Duckling Parade
zhawa.tinkers
5.7 k
3.2 k
stitch
stitch
Homee Creations
16.7 k
2.9 k
Stitch / NO AMS
Stitch / NO AMS
Ethanprint3D
36.6 k
16 k
Knitted Duck
Knitted Duck
Smoggy3D
10.3 k
3.7 k