Print Profile(5)
Bill of Materials
Description
Make these adorable flame devil lights for Halloween with Bambu Lab Basic PLA. Print the main flame and slip over one of the faces. Play around with different color combos. Orange/Black and White/Black are my favorites. It uses standard 40mm electric tealights. Get them directly from Bambu Lab Maker's Supply. Btw. their RGBW Puck Lights are 62mm in diameter and fits the 175% and bigger flame devils. Check the BOM (bill of materials) - scroll all the way down.
The flame devil lights are available in 3 different sizes - check the according print profiles.
These are not just upscaled in Bambu Studio, I exported the model directly from CAD to make it bigger but also maintain the 2 & 3 walls to avoid huge printing times.
100% > 67mm x 67mm x height 95mm (2.6" x 2.6" x 3.7")
175% > 117mm x 117mm x height 165mm (4.6" x 4.6" x 6.5")
250% > 165mm x 165mm x height 235mm (6.5" x 6.5" x 9.2")
Check out my profile for more amazing Halloween lights.
Alternatively you can experiment with RGB tealights: https://amzn.to/4dKxGL8
I may earn a commission on qualifying purchases (at no extra cost to you)
Auto tree supports are activated and can be easily removed. Brim with 5mm is activated too. If you know that your bed adhesion is superb try to deactivate it, this will save you some time removing it by hand. For the bigger versions 175% and 250% I wouldn't recommend turning off the brim else it may cause a Spaghetti Monster! Don't change the seam position on the bigger versions! On the outer faces with the slit on their back I intentionally didn't put the seam position in the back corner, because that always caused the print to come off when it was exactly in the back corner.
Copyright:
All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
If you want to sell my prints commercially and legally, you can join my Patreon:
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.
Check out my Cute Candy Corn / Onigiri lights too.
Available in 3 different sizes up to 240%: https://makerworld.com/en/models/595400
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (955)