Search models, users, collections, and posts
Redline Airsoft Firebase regulator tournament lock
IP Report
Print Profile(0)
Add the first print profile to earn points
Boost
2
6
0
0
2
1
Released
Bill of Materials
List other parts
- ZipTies x 2: Your site will probably provide these.
Description
A regulator tournament lock for the Redline Airsoft Firebase regulator. Accepts Padlocks and zip ties.
My local airsoft site requires a tournament lock for regulators. This reg is quite old and doesn't really lock in a very safe manner. This 3d printed tournament lock uses both zip ties and optionally 2 padlocks(4.2mm Shackle diameter).
Padlocks used: Yale Keyed Padlock, Body Width: 25 mm, Body Height: 26 mm, Body Depth: 11 mm, Shackle Diameter: 4.2mm
Print settings:
Layer height: 0.16 - 0.28mm (Doesn't really matter as long as you can print the overhangs easily.
Supports: Recommend organic/tree supports from buildplate only.
Walls: 5+, You want this as solid as possible incase it get's shot by a BB.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)