Search models, users, collections, and posts
Freddy vs. Jason Hueforge
IP Report
Print Profile(1)
0.08mm layer, 3 walls, 100% infill
Designer
4.7 h
1 plate
Open in Bambu Studio
Boost
28
43
0
0
27
17
Released
Description
Project: Freddy_vs_Jason
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 235x132.19mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Grey
At layer #23 (1.92mm) swap to White for the rest.
Documentation (1)
Other Files (1)
Freddy_vs_Jason_describe.txt
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)