Modular Horizontal TV Stand

 While for use as a game board this can also be effectively used to make a raised table or shelf for what ever your purposes are. 

All parts for this model are print in place so need need for supports!

What you need:

• 8x M3 screws 8mm
• TPU feet are optional. I will be working on fittings in the future. 

Recommendations:

• Print Leg and Screw in PETG.
• Print the leg on its side.
• I printed all parts with 50% infill and it has very little give.
• Bracket screws can be a little tricky to get threading so be patient.
• Use a brim with 4-5 layers for the screw head for best adhesion. 
• Print the leg on its side for best results 
• Use a silicone lubricant to encourage easy movement of the screw