Search models, users, collections, and posts
Stringing Test (Filament Stringing Test)
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
39 min
1 plate
Open in Bambu Studio
Boost
5
12
4
3
102
25
Released
Description
Stringing Test
Easily test the stringing of filaments.Suitable for all 3D printers.（轻松测试长丝的穿线。适合所有3D打印机机型。）
Calibration requires many trials, so use a simple test model.（校准需要多次试验，因此请使用简单的测试模型。）
You can know the condition of your consumables through a short print test, and you can also know the accuracy of your 3D printer through the printed model.（通过短时间的打印测试即可知道你的耗材状况，同时也可以通过打印出的模型了解你的3D打印机的精确度等情况。）
Recommended setting：
2wall
0.2mm layer height
15% filling
You can also make appropriate changes according to your own situation.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (4)