Fretsaw table - Jigsaw table - Laubsägetisch

A simple jigsaw / fretsaw table suitable for use with Festool clamps.

The simple clamps of normal fretsaw tables only fit very thin table edges. Especially when things get a little "thicker", a normal screw clamp would be better.

Here is a saw table that can be used together with the clamps for guide rails.

The groove is 12 x 8 mm and so other clamps for guide rails should also fit.

To make the saw table sufficiently stable, it should be printed with 5 top layers, 4 outer layers and 25% infill.