Norm's Emporium

cover

PXL_20240811_213109197.jpg

PXL_20240811_212535959.jpg

PXL_20240811_212544157.jpg

plate_1.png

2024-08-11_3b768b762423d.jpg

0.2mm layer, 2 walls, 15% infill

Inner -100% + 1 magnet void

Outer -100%

plate_2.png

Inner -150% + 3 magnet voids

plate_3.png

Outer - 150%

plate_4.png

West

20260221_172428.jpg

20260221_165008.jpg

20260221_173245.jpg

20260221_173257.jpg

20260221_164717.jpg

20260221_175910.jpg

20260221_175845.jpg

I replaced the original exterior magnet mount inlet on the inner mouth with an embedded/print over magnet void for 20x3mm magnets.The embedded/print over magnet void allows for the assembled Tremors worm to sit flush on the metal surface and is a “glueless magnet application.”  The magnet voids are 21x3.2mm allowing ample room for 20x3mm magnets.  The inner mouth print pauses at 3.8mm allowing time to drop the magnets in place. After clicking resume, the printer will print over the magnets; essentially encasing the magnets into the inner mouth worm piece.&nbsp;100% scale requires qty.1 - 20x3mm magnet 150% scale requires qty.3 - 20x3mm magnets&nbsp;Filament: Inner – Red basic PLA  ….  Outer – Brown basic PLA&nbsp;Amazon link for 20x3mm magnets <a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.com/dp/B0CCX9ZJKN?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0">https://www.amazon.com/dp/B0CCX9ZJKN?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0</a>

Encased magnets for 100% and 150% scaled versions

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This is a sand worm, like in Tremors, because I needed one.No supports needed. Two parts, glue them together.The magnet hole is 17.5mm x 3mmIt sticks out about 8 cm from the fridge, not optimal, but worth it.&#34;Broke into the wrong gosh dang fridge didn&#39;t you!&#34;

Tremors sand worm fridge magnet

ASIA

Print Profile(2)

Description

Comment & Rating (15)

License

Related Models