Lancer tactical AEG M4 drop stock adapter

You will need a M5x35mm screw and a M5 nut to connect it all.

Drop stock mod for lancer tactical m4. Lowers the stock by a little to be able to use sights light irons easier with full face mask such as the DYE I5. I'm not sure if it will fit other brands of m4 but its open to changes or I'd be willing to make a resized one if the dimensions for the brand is sent in. Still newer to modeling so any critiques are welcome or advice on what could be changed.

To install all you need todo is unscrew the screw at the bottom of the buffer tube and take the tube off, then feed the connector wire through the whole for the wire (it should be able to fit without disconnecting the wire from the gun), then take the M5 nut and put in the cut out on the bottom of the part you may need to help hold the nut in with another screw or other object, then install the buffer tube onto the new lower connector, once the buffer tube is on use the M5x35mm screw to screw it into the receiver of the AEG and you should be all set to go.