Search models, users, collections, and posts
KISS The Revenge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.7 h
1 plate
Open in Bambu Studio
Boost
19
20
2
4
24
7
Released
Description
Project: The Revenge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150.43mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.6mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
PLA PolyLite Grey Transmission Distance: 1
PLA Smart Recycled Red Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #19 (1.6mm) swap to Grey
At layer #22 (1.84mm) swap to Red for the rest.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (2)