Search models, users, collections, and posts
Crib (Cribbage) Pegs
IP Report
Print Profile(4)
Set of 3s
Designer
47 min
1 plate
Set of 2s
Designer
47 min
1 plate
Singles
Designer
23 min
1 plate
No Brim - SuperTack Plate
Designer
39 min
1 plate
Open in Bambu Studio
Boost
182
589
174
73
2 k
1.5 k
Released
Description
Created some crib pegs to go along with my crib board model:
https://makerworld.com/en/models/578508
I have a few print profiles:
- Set of 2 (the number that will work with the travel crib board and fit in the storage area). Using AMS to do all 3 colors in one print job, set to print by object (2 pegs = 1 object). Normally I might be concerned about the blob at the beginning but since there is a brim, the blob simply forms on the beginning of the brim which is discarded.
- Set of 3 (again with AMS; 3 pegs = 1 object) for those who may want 3 of each color for another board or use.
- Individuals…just 3 pegs all the same on the plate, you can make more or print less however you wish, this may be easier for those without AMS.
Membership
Commercial Licenses Now Available. Also basic tier if you just wish to add some financial support to help new models come out.
Join
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (174)