Legionella pneumophila within a phagocytic cell

This is a hue forge of a scanning electron micrograph image of a bacteria called legionella pneumophila that causes a severe pneumonia in some people. It normally lives in fresh water and infects free living protozoa. This image shows several bacteria inside a human white blood cell (phagocyte).

PRINT INSTRUCTIONS:

100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x135.94mm in size
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to White for the rest.