Search models, users, collections, and posts
Asta Demon Slayer Sword 52 Inches
Remixed by
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
30.1 h
2 plates
No alignment dowels 0.2mm layer, 2 walls, 15% infill
30 h
2 plates
Open in Bambu Studio
Boost
63
141
7
6
114
43
Released
Description
Print will require post processing. Everything prints on two plates with no supports. You will need three different size wooden dowels for assembly.
1-½ inch wooden dowel roughly 36 inches long
1- 3/8 wooden dowel roughly 16 inches long
1-¼ inch wooden dowel for alignment pegs roughly 8 inches long.
I used Kraken glue to assemble. Plastic wood and auto body filler primer fill any cracks. Rough Sanded with 80 grit and stepped all the way to 800 before applying the final paint.
PICTURES ON HERE ARE NOT THE FINISHED PRODUCT.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-NoDerivatives
Comment & Rating (7)