Valve Cap
Print Profile(4)
Description
Since most of the valve caps on Makerworld have some design flaws which could lead to air leakage and/or don't meet my taste, I decided to design my own little model. The thread inside is based on the DIN 7756:1979-02 and was adjusted in order to improve the printability.
I've provided 2 different models. One with looser and one with tighter tolerances. Personally I prefer the one with the tight tolerances which might need a little more torque on the first installation. After that, it works buttery smooth! You might want to try both models and pick your favorite.
I highly recommend to print the valve cap in ASA due to its UV properties!
Weight: 0.5g
Other than that, there is not much to say :)
All the best, Bernd :)
Boost Me (for free)
Wrong turn! Nothing to see here :3
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (433)