Cyclone dust separator

Summary

All of the parts are printed with 0.6 mm nozzle
Most of the parts dont require supports, however the Snail part needs a little supoort in the final straight portion of the tube (the end you connect your hose to)

assembly porcess:
4)Snail assembly:
Glue the "Cyclone lid" to the "Snail" and insert the "intake" from the bottom
This whole assembly slides into the Cyclone body
3)Cyclone body
2)bucket lid
1)spacer foir bucket lid.stl

Recommend mounting to a sturdier bucket. Buckets with thinner walls can deform (depends on the power of your vacuum)

Print Settings

Resolution: 

0.32mm

Infill:                      

25%

Filament: Creality PLA