F-15 - Free 3D Print Model

Search models, users, collections, and posts

NoelHB

Hobby & DIY>Vehicles

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.1 h

1 plate

4.6(99)

smaller and less material 0.2mm layer, 2 walls, 50% scale

1 h

1 plate

4.4(25)

1:144 Scale

1.9 h

1 plate

4.5(6)

Newly redesigned stand and Quality optimized

3.4 h

1 plate

Open in Bambu Studio

Boost

503

1043

157

2.6 k

1.7 k

Released

Description

f15 jet with 4 missiles (2 on each side),

printed in one piece, without the need for gluing

Comment & Rating (157)

@user_471892679

I’ve had (3) attempts and one of the engine supports keeps breaking. Any advice?

(Edited)

The designer has replied

@Noel.H.B.

You can try opening the model in a slicer and setting stronger supports there

@user_471892679

Replying to @Noel.H.B. :

I was able to slow the speed down which resolved the issue. Turned out really nice - thanks!

@user_2788092509

Print Profile

0.2mm layer, 2 walls, 15% infill

it looks cool and I painted it

@user_393850253

Boosted

great design. the rear fins broke off while taking supports off. but glue is a simple fix. new to the 3D Printing fun. so wrote off as learning experience.

The designer has replied

@Noel.H.B.

I'm glad you like it

@user_545829453

I like it BUT be extremely careful with the supports cause, if not some parts of the missles will fall off

The designer has replied

@Noel.H.B.

Thank you for your feedback

@user_2213901434

Print Profile

0.2mm layer, 2 walls, 15% infill

My sister wanted to print this for her JROTC instructor as a gift. I decided to print it. I tried printing it twice but the horizontal stabilizer kept failing. Soon it broke off. When I took it off the print bed, it wasn’t there. It was just a mess of spaghetti. I tried to print again, in a different orientation, but it would work. I ended up not having it done in time for the end of the school year. I’ll try printing it again. Hopefully it’s better. If I make it again, I’ll update.

The profile uploader has replied

@Noel.H.B.

Did you have supports for vertical stabilisers?

@user_2213901434

Replying to @Noel.H.B. :

Yeah, I'm pretty sure...Maybe not.

@user_2431883087

amazing print had almost no issues but be careful when removing the missiles

@Delta_1

Print Profile

smaller and less material 0.2mm layer, 2 walls, 50% scale

awesome little jet, it printed better than I thought it would. the supports were a pinch difficult to break off, I recommend clippers and patience.

@user_3509532663

Print Profile

0.2mm layer, 2 walls, 15% infill

@E4B_Prints

Print Profile

0.2mm layer, 2 walls, 15% infill

the missles are a little flimsy on the back so when you remove supports for the fins of the missles be careful otherwise they break off. other than that, quick print and super cool!

@user_2085539631

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

amazing just had a problem with the support ripping of parts of the missiles

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.