Search models, users, collections, and posts
Los Angeles Dodgers baseball gear/hat, bat, jersey
IP Report
Print Profile(3)
bat 0.2mm layer, 2 walls, 20% infill
Designer
3.9 h
1 plate
jersey 0.08mm layer, 2 walls, 100% infill
Designer
1.1 h
1 plate
hat 0.08mm layer, 2 walls, 15% infill
Designer
5.9 h
1 plate
Open in Bambu Studio
Boost
179
329
20
10
515
149
Released
Description
Cap: .08 layer height, .16 initial layer height, uses supports, blue, dark blue, white, and black. Make sure your build plate is clean and use glue stick for best adhesion
Jersey:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 105x131.52mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.1mm
Swap Instructions:
Start with black
At layer #8 (0.72mm) swap to dark blue
At layer #11 (0.96mm) swap to blue
At layer #19 (1.6mm) swap to White for the rest.
Bat: .20 layer height, .20 initial layer height, blue and white
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (20)