Tonie Tonibox Ikea Skadis - Free 3D Print Model

Search models, users, collections, and posts

Sergej P

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

H2S

H2C

H2D Pro

X1 Carbon

X1E

H2D

P2S

P1P

X2D

A2L

0.2mm layer, 3 walls, 12% infill all in one profile

Designer

5.6 h

4 plates

4.8(92)

Open in Bambu Studio

Boost

214

804

132

104

779

538

Released

Description

Holder for Box with Customizable Front

This holder is specifically designed for the SKÅDIS board from IKEA. The front of the holder can be customized directly in the Bambu Slicer to meet your individual needs. The charging station is seamlessly integrated into the holder and can be easily removed through the built-in opening. When printed in PETG, the holder offers particularly high stability.

Shelves in Four Sizes

Additionally, there are shelves available in four different sizes:

80 mm: Space for 2 figures
120 mm: Space for 3 figures
160 mm: Space for 4 figures
200 mm: Space for 5 figures

The dimensions of the shelves are chosen so that any configuration can be placed side by side. The shelves have cutouts where washers with a maximum size of 24x2.4 mm can be placed during printing. This makes the shelves magnetic, preventing the Tonie figures from falling off easily. Light Tonie figures can even be attached under the shelves.

Halter für Box mit personalisierbarer Front

Dieser Halter ist speziell für das SKÅDIS-Board von IKEA konzipiert. Die Front des Halters kann direkt im Bambu Slicer personalisiert werden, um deinen individuellen Bedürfnissen gerecht zu werden. Die Ladestation ist nahtlos in den Halter integriert und kann dank der eingebauten Öffnung leicht wieder herausgenommen werden. Wenn der Halter aus PETG gedruckt wird, bietet er eine besonders hohe Stabilität.

Regale in vier Größen

Zusätzlich gibt es Regale in vier verschiedenen Größen:

80 mm: Platz für 2 Figuren
120 mm: Platz für 3 Figuren
160 mm: Platz für 4 Figuren
200 mm: Platz für 5 Figuren

Die Maße der Regale sind so gewählt, dass jede Konstellation nebeneinander platziert werden kann. Die Regale verfügen über Aussparungen, in denen während des Drucks Unterlegscheiben mit einer maximalen Größe von 24x2,4 mm platziert werden können. Dadurch werden die Regale magnetisch und die Tonie-Figuren können nicht so leicht herunterfallen. Leichte Tonie-Figuren können sogar unter den Regalen angebracht werden.

Comment & Rating (132)

@Marcel.OPC

Print Profile

0.2mm layer, 3 walls, 12% infill all in one profile

I tuned the parts a bit so I could put magnets in from below to make sure the tonies don't fall off The print itself is very good Would it be okay if I uploaded the model with the holes to my Makerworld account

The profile uploader has replied

Show original

@spcreationhub

And when did you notice that Tonis have different polarities 😀

Show original

@Marcel.OPC

Replying to @spcreationhub :

No idea, they are for an acquaintance. Are they really polarized differently?😂

Show original

@spcreationhub

Replying to @Marcel.OPC :

Yes, that's why I had to use washers instead of magnets

Show original

@DahctorWorm

Boosted

I printed this in Marble White PLA with a 100% infill. it’s solid as a rock and looks great. the kids love it!

(Edited)

The designer has replied

@spcreationhub

ok wow, why 100% infill ?

@DahctorWorm

Boosted

Replying to @spcreationhub :

1) I’m fairly new to printing and wanted to make sure the hooks wouldn’t break. 2) I know my kids and how rough they can be. it was probably overkill but they’re super sturdy, which is what I wanted.

(Edited)

@spcreationhub

Replying to @DahctorWorm :

The thing is, the hooks are full of filament because the wall lines fill the entire hook surface, and no additional infill is needed.

@evilTitan

Hi. Could you change the license? I would upload a remix with a more sturdier base plate, which also works in PLA. For the rest: Fantastic Model.

@julien.lestienn

Boosted

Nice, can I have it ?

@evilTitan

Replying to @julien.lestienn :

https://makerworld.com/en/models/1151925

@BLCKBRD

Great design, thank you! 💪

The designer has replied

@spcreationhub

Thanks looks good on you 👍🏼

Show original

@toolmak3rStudio

Boosted

Print Profile

0.2mm layer, 3 walls, 12% infill all in one profile

Top design! Daughter is very happy

The profile uploader has replied

Show original

@spcreationhub

Thank you :-) enjoy it

Show original

@Bonusheft

Boosted

Print Profile

0.2mm layer, 3 walls, 12% infill all in one profile

Super, thank you very much, my little one is delighted

The profile uploader has replied

Show original

@spcreationhub

Gladly ;) as long as it's not used commercially… 😆Unfortunately, there are increasingly more villains here who use my files to enrich themselves

Show original

@LyrCraftCreatn

Print Profile

0.2mm layer, 3 walls, 12% infill all in one profile

works fine. I used a blank cloud so the 2 kids don't complain

@tumlef

Boosted

Print Profile

0.2mm layer, 3 walls, 12% infill all in one profile

Thanks for the lovely model. I printed it in PETG. It's holding up really well so far. I swapped the washers for 3mm laser-cut steel discs to ramp up the magnetic effect over a bigger area. A deeper version of the shelves would be nice, as others have commented.

@user_275167896

Print Profile

0.2mm layer, 3 walls, 12% infill all in one profile

I really like it I printed it without the front and now the box has a nice spot where our little one can't reach it

Show original

@user_3496198418

Print Profile

0.2mm layer, 3 walls, 12% infill all in one profile

to weak for bigger tonics

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.