Hand Propeller Toy - Free 3D Print Model

Search models, users, collections, and posts

3DxSC

Toys & Games>Outdoor Toys

IP Report

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

A1, P1, X1 3 color 1 set 0.2mm layer, 2 walls, 40% infill

Designer

35 min

1 plate

4.8(9)

A1, P1, X1 Single Color 0.2mm layer, 2 walls, 40% infill

Designer

32 min

1 plate

4.5(6)

A1 Mini Single Color 0.2mm layer, 2 walls, 40% infill

Designer

37 min

1 plate

5.0(2)

A1 0.2mm layer, 2 walls, 40% infill

Designer

3.9 h

1 plate

5.0(1)

Click to see more

Open in Bambu Studio

Boost

121

301

397

275

Released

Description

I've seen a few of these around and thought I would put my own take on it. The propeller has a slight taper on the end of the blades that gives it a little more weight on the ends allowing it to spin a little faster and longer than others. The profile has 8 sets on the build plate meant for X1, P1 and A1 series printers. These print directly on the platform with a small brim and minimal support. If you experience adhesion issues I usually just wash the PEI plate with water and a little bit of dish liquid. If it still doesn't hold, a standard glue stick works amazingly well and washes off easily with a little water.

Comment & Rating (28)

@1silverlining

Print Profile

A1, P1, X1 Single Color 0.2mm layer, 2 walls, 40% infill

Great print

Show original

@user_4232945427

Print Profile

A1, P1, X1 3 color 1 set 0.2mm layer, 2 walls, 40% infill

printed great thank you

(Edited)

@LayerForge.

Print Profile

A1, P1, X1 3 color 1 set 0.2mm layer, 2 walls, 40% infill

Other Issues:rarw

The profile uploader has replied

@sclark3100

what were the issues?

@LayerForge.

Replying to @sclark3100 :

i was gunna do 5 but bambu lab woulnt let me

@sclark3100

Replying to @LayerForge. :

so there weren’t any issues with the print?

@Softrageproject

How do I get it to print with three colors? when I open it in my orca slicer, it only shows up in one color?

The designer has replied

@sclark3100

The .3mf file was made in Bambu Studio so it should work in there. I’m haven’t used Orca but think it is very similar so you should be able to add a filament change at a certain layer height on the preview page when you slice it. If it’s like Bambu studio it’ll have a slider on the right side. slide it to the layer you want to change at then right click the slider button and click filament change. do it again at another layer for the third filament.

@billy2025

Print Profile

A1, P1, X1 Single Color 0.2mm layer, 2 walls, 40% infill

Bed Adhesion Issue:wouldn’t stay on the plate ripped off

The profile uploader has replied

@sclark3100

Please clean your build plate with dish soap and let it dry thoroughly. Then give it another shot. I’ve made hundreds of these and as long as the build plate is clean I haven’t had any issues with adhesion. Did you print directly from the app or download it and modify settings?