RyanBru

cover

IMG_0746.png

IMG_0744.png

video_2024-08-03_11-40-55.gif

IMG_0778.png

IMG_1266.jpg

IMG_0976.png

plate_1.png

2024-08-03_e16c38df1325c.webp

Original print profile was taken down for apparently not containing an image of the model printed when it did. I&#39;ve re-uploaded it here. This is a fairly straight forward profile that prints to the original large size, not compatible with smaller printers like the A1 mini. Tried and tested supports and 0.16mm layer, 2 walls, 15% infill&nbsp;&nbsp;

Original Iron Golem 0.16mm layer, 2 walls, 15% infill

ZorroLoco

photo_2024-12-19_20-51-24.jpg

photo_2024-12-19_20-51-24 (2).jpg

photo_2024-12-19_20-51-23.jpg

photo_2024-12-19_20-51-22.jpg

Size scaled to 55% and layer height is 0.12mm

0.12mm layer, 2 walls, 15% infill

Print in TPU

plate_2.png

plate_3.png

plate_4.png

A Teece

IMG_0633.jpg

I&#39;ve coloured in the model to avoid painting, merged the dowels into the model and created some TPU gromets/seals to wrap around them.&nbsp;Post printing, just remove the support material, slide over the gromet and your done. No glue. No painting.&nbsp;This profile NEEDS support material. It won&#39;t print well if you use regular fillament for the support interface. Although I havne&#39;t tried on this model I have had perfect results using PETG as a PLA support material if you follow the Bambu Lab Wiki on the process.&nbsp;This profile has reduced colours compared to my 2 other profiles so it can be printed on any printer with a single AMS. The dropped colours are:<ul><li>Black background around the eyes on the head are now dark grey.</li><li>The light green on the right arm is now dark grey.</li></ul>I&#39;ve marked this as not compatible with the H2D only because if you have a H2D and a 1 or 2 AMS units the other profiles are better. If you have a H2D with no AMS then none of these multi colour profiles are probably for you.

1 AMS Single Extruder (Reduced) Multi Colour with TPU Joints

I&#39;ve coloured in the model to avoid painting, merged the dowels into the model and created some TPU gromets/seals to wrap around them.&nbsp;Post printing, just remove the support material, slide over the gromet and your done. No glue. No painting.&nbsp;This profile NEEDS support material. It won&#39;t print well if you use regular fillament for the support interface. Although I havne&#39;t tried on this model I have had perfect results using PETG as a PLA support material if you follow the Bambu Lab Wiki on the process.&nbsp;This profile NEEDS 2 AMS units. I have a other profiles that you can print the same model using 1 AMS unit + the external spool on a H2D or 1 AMS unit with a few less colours on other printers. It won&#39;t be as efficient, but you end up with the same model.

2 AMS Multi Colour with TPU Joints

I&#39;ve coloured in the model to avoid painting, merged the dowels into the model and created some TPU gromets/seals to wrap around them.&nbsp;Post printing, just remove the support material, slide over the gromet and your done. No glue. No painting.&nbsp;This profile NEEDS support material. It won&#39;t print well if you use regular fillament for the support interface. Although I havne&#39;t tried on this model I have had perfect results using PETG as a PLA support material if you follow the Bambu Lab Wiki on the process.&nbsp;This profile NEEDS 5 fillaments on a single plate, so is for a H2D with a single AMS unit. If you have 2 AMS (and any printer) see the other profile. If you have a single AMS and a single extruder printer see the reduced colours profile.

1 AMS Dual Extruder Multi Colour with TPU Joints

Minecraft Iron Golem. This is a large model that is around 21.5cm tall and printed in PLA. It is printed in multiple pieces and requires assembly in order to simplify the print process. In turn this does mean the arms, head and body are rotatable to create poses, however the friction fit dowels that join the pieces together may become loose over time. I would recommend super gluing together where possible.&nbsp;The model does require some supports however these are fairly easy to remove with a small tool to break them off.&nbsp;Assembly is quite easy:<ul><li>Smallest dowel connects the nose to the face</li><li>The 4 largest dowels connect the head, arms and lower body pieces to the main body</li><li>The 2 thinner dowels are used to connect the legs</li></ul>Super glueing may be required<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Like my design and want to support me? Leave a boost, it’s free and I super appreciate it! Thanks for the love ♥️</boostcontent></boostme>

Minecraft Iron Golem

ASIA

Print Profile(5)

Description

Comment & Rating (173)

License

Related Models